Lubes/Cleaners

WD-40 Dry Lube is the perfect chain and component lubrication for dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike, it keeps your bicycle shifting like a dream and pedaling smoothly. It boasts special polymers that form a dry film to protect your chain and repel dirt in dry conditions. The result is a clean, quiet, perfectly functioning and long-lasting drivetrain.

WD-40's Wet Lube is the perfect bicycle lubricant for riding in wet and muddy conditions. Their exclusive formula has been tested and proven by mechanics and cyclists and is amped up for premium lubrication. Wet Lube improves shifting and extends the life of your chain and drivetrain components by repelling moisture and gunk. - For extreme wet and muddy riding conditions. Works well in winter conditions as well (handles cold well) - Improves shifting and extends chain life by repelling moisture and gunk - Goes on wet, stays wet - Does not contain wax - Specifically developed for bicycles and thoroughly tested by WD-40 scientists in partnership with IBDs, pro bike mechanics, and pro cyclists

Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Bike Protect is the ultimate liquid bicycle protection. Preserve and freshen your bike with Bike Protect's incredible water dispersing action! It's a perfect 'all over', after-wash corrosion inhibitor due to its extremely high oil content. This increased oil content creates the finest bike protection spray on the market. It drives out moisture and leaves a sparkling, non-sticky protective layer on your frame, drive chain, metal parts, and paintwork. It's ideal to spray onto your chain to drive out moisture before you apply any of the brilliant Muc-Off chain lubes. Bike Protect doesn't just disperse water after you've given your bike a good clean. It also prevents dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction, wear, and energy consumption. - High performance formula leaves dry, non-sticky, protective film - Safe on frame, metal parts, plastics, rubber, paint, and carbon fiber - Drives out excess moisture - Prevents dirt adhesion - Light lubricant coats moving parts - Quick and easy to use - Aerosol Spray - Ideal for Road Cycling, Cyclocross, MTB, & Fat Bikes - Provides the ultimate performance in freezing conditions - For chains, cables, shifters, derailleurs, pedals, & cleats - Incredible durability - Pipette system for easy application

Keep your precious steed in tip-top condition with the Muc-Off Harsh Condition Barrier. With a state-of-the-art thin film coating, it'll make light work of rust and corrosion. It's the perfect upgrade for winter months, or to keep your bike looking fresh all year long – as you'll have 12 months of protection. This innovative product is a must-have. It'll keep moisture out, creating a durable anticorrosive layer of protection on your bike's frame, chain, metal parts, plastics and paintwork. And on parts that have already got some rust showing, it'll get rid of it altogether. To make it super easy to check that you're protected, we've added a UV dye. With a UV light* you can check it's correctly in place and ready to protect your bicycle, e-bike or motorcycle. So you can get out there and enjoy the ride, no matter what the weather. *UV light sold separately FEATURES: - Quick and easy to apply - Dissolves existing rust - 300+ hours salt spray to ASTM B-117 - Thin transparent film - Strong capillary action allows the product to get into tight cracks and crevices - Contains UV application dye to ensure complete protection - Resistant to hot, cold and salt-water - Ideal for use in harsh environments - Creates a self-healing barrier, active for up to 12 months - Safe to use on electrical components, paintwork, and most rigid plastic trim - Contains no wax silicon, Teflon or water - Perfect for bicycles, e-bikes and motorcycles

- New high-pressure turbo spray - Easily cuts through tough grease in seconds - No rinse, heavy duty formula - Can be used on chains, gears and individual components - Works on tough waterproof grease and chain wax

- Prevents and stops corrosion on metal surfaces and batteries - Ideal for protecting battery terminals and casings - Resistant to hot, cold and salt water - Use after washing to drive out excess water - Protection lasts up to 3 months

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

Chill Zone™ is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone™ a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

- Formulated with nano-ceramic boron nitride and surface bonding resins to create an ultra-slick, protective dry film - This film does not absorb abrasive contaminants, which reduces friction, prevents annoying squeaks and premature wear, and repels moisture to prevents corrosion - Sprays on to fully and evenly coat all frictional surfaces - Engineered to ensure fast engagements and smooth releases every time

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

World's first pliable hot melt chain wax formula with Graphene for use in crockpots is here. GRAPHENwax—Super pliable, non-crumble, quiet, clean and extremely easy to break-in formula. It exhibits excellent dirt protecting capabilities and durability while maintaining impressively low friction for a prolonged period of time in dry and mixed conditions. It's the easiest wax to break-in after chain cools down—simply hold your chain in one hand and run it between two fingers of your free hand (as per our video) and job done—no more solid sticks or backpedaling issues. Our wax doesn't crumble, chip or leave any marks thanks to our proprietary formula. It's everything you wished for in a hot melt wax. Perfect for Road, Triathlon, Gravel, Mtb and E-bike. Keeps your drivetrain spotless clean. Can be used along with GRAPHENlube. It's the most quiet hot melt wax you will ever use. Unlike other Hot Melt waxes, GRAPHENwax not only exhibits lowest friction, but also lasts longer and is much easier to use. Usually after dipping the chain in melted wax you need to wait until chain cools down and then painstakingly break every chain link so the chain can be flexible again, leaving crumbled mess behind and particles on the frame and crank. With GRAPHENwax, we have reinvented this process. After the chain cools down, you only need to run it between your fingers along its entire length, and the chain is broken-in leaving no pieces of wax behind. Our wax simply doesn't crumble during the chain movement, meaning you have more wax that protects the drivetrain for longer. It can also withstand those hot days where other wax lubricants simply melt off your chain. GRAPHENwax will not stain your fingers when handling the chain and it's the quietest wax coating you will use. It's your "dream come true" wax lubricant. GRAPHENwax and our World Tour winning GRAPHENlube go very well together. If you plan longer rides you can "top it up" with GRAPHENlube. Chain will not require re-cleaning. Why we don't use Tungsten Disulfide (WS2) nor Molybdenum Disulfide (MoS2) additives. While these substances can exhibit super-low friction, they do it only in vacuum or inert gas. In normal humid air they not only have high friction but also very short life because of the rapid oxidation process. Using these additives in chain lubricant, where water is often present, is simply pointless. We also don't use any oils or paraffin oils in the mixture because it adversely impacts the friction. - 340g / 12 oz . +/- 4%. Each box contains 4 "squares" - Wax is black, but on the chain looks transparent. Doesn't leave marks. - Hydrocarbon waxes containing special mix of high-purity graphene. It does not contain any harmful solvents.

Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling-specific applications. It reduces friction on moving components while protecting them from contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs, headsets, general bicycle assembly, and more. - Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to 180ºC) in all conditions - Creates smooth, easy component movement for low energy loss - Long-lasting lubrication for extended bearing and component life - High resistance to oxidation and corrosion - Can be used on steel, aluminum alloy, titanium, and carbon fiber. Applications: - hub bearings - free hubs - pedals - headsets - bottom brackets - suspension pivots - general assembly

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.