Wheels

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This “Get out of Jail” feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. We all know how much it sucks to miss a ride and this feature should help make sure that doesn’t happen. Constructed from 7075 Aluminium and made to the manufacturer’s exact specifications. Manufactures part number: 820-00-024-KIT Please see https://burgtec.co.uk/product/fox-40-fork-axle/ for fitment information.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Constructed from 7075 Aluminium and made to the manufacturer’s exact specifications. Manufactures part number: 00.4318.027.000 Please visit https://burgtec.co.uk/product/rockshox-boxxer-fork-axle/ for fitment info.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature a get out of jail 6mm Allen key on the drive side of the axle if you manage to round the non drive side. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer’s exact specifications. Manufacturer’s Part Number: 01.21.51.0148 Fits: Spire Alloy 2021 - 2023 Spire Carbon 2021 - 2023 Relay Carbon 2023 Patrol Alloy 2021 - 2023 Patrol Carbon 2022 - 2023 Repeater 2022 - 2023 Sentinel Alloy 2021 - 2023 Scout Alloy 2021 - 2023 Smuggler Alloy 2023 Smuggler Carbon 2024

AERO UNLIMITED Featuring an all-new 50mm aero Rim profile and next-generation R3-C aero hubs, the CADEX 50 Ultra Disc balances supreme aerodynamic performance with stability and control in all conditions. Innovative Super Aero bladed carbon spokes further enhance efficiency and minimize weight, while ceramic bearings reduce power loss by up to 30 percent. The wide 22.4mm inner rim width and hookless bead are optimized for high-volume tires and create a seamless interface with increased sidewall support and the ability to run lower tire pressures for improved handling and road feel. UCI & ITU Approved. FEATURES - Wind-tunnel-proven 50mm Hookless Aero Rim Profile, Super Aero carbon spokes and R3-C aero hubs combine for maximum aerodynamic advantage. - High-tensile-strength Super Aero carbon spokes minimize lateral flex for efficient acceleration and sprinting. - Custom-tuned Dynamic Balanced Lacing technology creates a stiffer, more efficient wheel with outstanding power transfer. - Precision machined R3-C40 aero rear hub reduces aerodynamic loss and virtually eliminates bearing load. - Ultra-smooth, low-rolling-resistance ceramic bearings offer improved action for minimal power loss. - Precision reinforced lay-up technology places carbon fiber only where needed, creating a strong, stiff rim structure with an overall wheel weight of 1349g. - Hookless rim technology features a continuous carbon fiber structure with an increased rim bead width of up to 3.8mm on each side to create a rounder tire shape for superior support, grip and handling. - Designed for today’s higher volume road tires, the 22.4mm wide inner rim width creates an increased tire contact patch, resulting in better grip and a smoother ride. Specifications: - Tubeless: CADEX Tubeless System (rim tape and valve kit included) - Suggested Tire Size: 700 x 25C – 700 x 32C - Rim Height: 50mm - ETRTO: 622-22 - Hub Compatibility: Shimano HG / SRAM XDR 12 / Campagnolo - Bearing: CADEX Ceramic Bearings - Front Axle: 100x12 Thru Axle - Weight (Front): 595g

- Designed to stabilize 15g spokes in most hub flanges - 1000-pack

Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.

- Converts Schrader rims to Presta - Rubber - Sold individually

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Heavy duty and extra wide PVC rim strips for maximum tube protection.

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

- Shell: 8mm flanged axle nut - Flanged

Replacement Axle nuts for three speed Sturmey Archer hubs.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Parts for repair and maintenance of DT Swiss hubs.

Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

- Replacement part for Surly hubs.

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

- Steel end nut for QR skewers

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #16 Clutch Ring

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #20 Cone Drive

• Rim strips for 20-inch fat bike rims • 80mm wide

Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

- Replacement adjustable nut for three-speed internal hubs.

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

Rubber rim strips for 24-inch diameter fatbike rims. - Sold individually

Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O