Wheels

- Campagnolo's first dedicated gravel wheel - UD carbon fiber with laquerless finish, ASTM 2 & DIN EN 17406 Category 2 certified - Proprietary 2-way fit technology, no need for tubeless tape - Asymmetrical rim profile with mini-hook to sustain higher pressures on smaller tires, 25mm internal width can handle 38mm up to 76mm tires - 1485g wheelset weight, 120kg weight limit

- 45mm deep aerodynamic carbon disc brake wheelset - Wind Tunnel Optimized rim profile, aerodynamic aluminum hubs, and USB ceramic bearings for optimal performance in all conditions - 2-Way Fit tubeless-ready rims with 19mm internal width, optimized for use with wider tires - G3 spoke lacing front and rear for maximum power transfer and braking performance - Black-on-black Dark Label graphics - Only 1520g per pair

Fully connected. Connect with your ride. Easy-to-install mounting adapters that fit a wide range of hub and spoke configurations. Highlights: - Easy-to-install various adapters for the Cannondale Wheel Sensor - Compatible with Cannondale Wheel sensor - Compatible with most hub and spoke combinations

Trainer ready. Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle. Where it thrives: The open road, on the trainer What it's built for: Versatility, convenience Highlights: - Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding - Compatible with Cannondale road bikes that utilize Speed Release dropouts

Trainer ready. Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle. Where it thrives: The open road, on the trainer What it's built for: Versatility, convenience Highlights: - Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding - Compatible with Cannondale road bikes that utilize Syntace X-12 dropouts

Fully connected. Connect with your ride. Integrated Cannondale wheel sensor, co-developed with Garmin, delivers hyper accurate speed, route and distance info, registers your bike, reminds you of needed service and more, all through the free Cannondale App. Highlights: - Captures essential ride data automatically - Includes adapters for most wheel types - Utilizes the Cannondale App for ultimate connectivity

XC, redefined. Equally ready on the start line or the trailhead, this wheelset meets the descending and climbing needs of modern XC, and then some. Where it thrives: In competition, challenging trails What it's built for: Precision, control, efficiency Highlights: - Carbon fiber construction, 25mm internal width, tubeless compatible - DT Swiss Aerolite spokes / DT Swiss 240 hub internals - 28h straight pull hubs / Weight: 1470g (pair)

Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018). In The Box - 4 x 61803 bearings - 1 x 61903 bearing - 1 x 61804 bearing - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

The rim for high-impact riding. The BA30 is a quality alloy rim designed to withstand a real beating. This is the rim for high-impact riding when the trails are rough and rugged. With an internal bracing structure, the BA30 has torsional stiffness for directional control in demanding circumstances. The BA30 features a thick bead wall adjacent to the tire to resist impact deformation, with a wider, rounded top-edge to reduce sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The BA30 is made with premium alloy, extruded with an internal brace profile and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Our fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split if you impact at the seam. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - 27.5: 570g - 29: 610g - 27.5" ERD: 566mm - 29" ERD: 604mm

Lighter format / all mountain / trail riding The PHASE30 mirrors Chromag's BA30 profile but in a lighter format that suits all-mountain and trail riding conditions. This is a high-quality alloy rim that is tougher than most with added protection at the bead-walls for impact resistance and reduced sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The PHASE30 is made with premium alloy, extruded and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Chromag's fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split at the seam if you have an impact there. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - ERD: 566mm - Tire sold separately

Lighter format / all mountain / trail riding The PHASE30 mirrors Chromag's BA30 profile but in a lighter format that suits all-mountain and trail riding conditions. This is a high-quality alloy rim that is tougher than most with added protection at the bead-walls for impact resistance and reduced sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The PHASE30 is made with premium alloy, extruded and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Chromag's fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split at the seam if you have an impact there. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - 29" ERD: 604mm - Tire sold separately

The rim for high-impact riding. The BA30 is a quality alloy rim designed to withstand a real beating. This is the rim for high-impact riding when the trails are rough and rugged. With an internal bracing structure, the BA30 has torsional stiffness for directional control in demanding circumstances. The BA30 features a thick bead wall adjacent to the tire to resist impact deformation, with a wider, rounded top-edge to reduce sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The BA30 is made with premium alloy, extruded with an internal brace profile and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Our fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split if you impact at the seam. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - 27.5: 570g - 29: 610g - 27.5" ERD: 566mm - 29" ERD: 604mm

Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.

Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs - Shimano HG/Synthesis Base Steel Driver

Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs - Shimano MS/Synthesis Base Steel Driver

Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs - XD/Synthesis Base Steel Driver

Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs - Shimano MS/Synthesis Base Alloy Driver

Control and stability for enduro riding. - Rims sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. - Rims sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

- Designed to stabilize 15g spokes in most hub flanges - 1000-pack

Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.

Parts for repair and maintenance of DT Swiss hubs.

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.