Parts & Accessories

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

Type: Patch Cement Size: Individual tube

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Anodized alloy construction - Fits standard Schrader valves

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Forged alloy construction - Fits Schrader valves

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level. - 5-pack

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

- Plastic storage box - Contains 7 large patches cement, and scuffer

The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

- Premium alloy presta valve caps in an array of colors

- Snap-On high-Pressure plasticized nylon protects tube from abrasion - Older stock is yellow, New stock is black with halo logos

- Shim adds support to Presta stem used in a Schrader rim

Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum extender comes with a small tool (not shown) for an air-tight installation.

- Tubeless Valve Rim Washer - Compatible with: Alloy Road and Carbon MTB Rims

- Tubeless Valve Rim Washer - Compatible with: Carbon Road Rims

Blocked a valve core? Crushed a rubber or snapped an o-ring? No problem, This service kit* has everything you need to spruce up your valves when swapping to your next set of wheels or new bike. Package contents: 2x black valve cores 2x rubber o-rings 2x rubber crush cones *Compatible with all Peaty’s Tubeless Valves Customise your valves! We also make Accessory kits with fresh lockrings, spoke key and valve core remover caps available in all colours.

Includes 16, 50mm tubeless repair strips.

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

Specialized's Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a personal, 8oz container that's ideal for two standard wheels. - Non-toxic, non-separating formula doesn't have a limited shelf life like the competition. - Coats the tube for permanent protection. - Works with any bicycle tube with a removable valve core. - Works continuously to prevent slow leaks. - Completely homogenous, so it doesn't puddle. - 8oz bottle fills two inner tubes. - 8oz bottle includes valve puller and hose under cap.

- Easily plug a hole in a tubeless or tubeless converted tire - No need to remove the tire from the rim, simply plug, replace lost air and go - Includes: Insertion tool and (5) rope plugs

Vittoria introduces Universal Sealant, the new range of anti-puncture bike tire sealants designed for Road and MTB use. The formula of the sealant has been improved. Universal Sealant does not contain ammonia, repairs larger punctures (up to 7mm), acts faster, and is compatible with both Road and MTB tubeless tires and with any type of inner tube. It is easy to use thanks to its specific pour spout that allows the application of the sealant straight from the valve. Universal Sealant is the universal anti-puncture bike tire sealant.

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

40mm Valve Core Extender

These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061

Surly Rim Strips have one job and they do it well. The 58mm nylon rim strip is purpose-built for the Clown Royal Rim, and Moonlander bike.

Grenade style Schrader Valve caps

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required

Whether you’ve lost a valve cap or just want to bling your existing pair of peaty’s valves, this kit gives you everything you need. Package contents: 1x spoke key cap (for 3.4mm spoke nipple) 1x valve core remover cap 2x lock rings Compatible with all Peaty’s Tubeless Valves Reuse Refresh Recycle Did you know we also make maintenance kits with fresh o-rings, rubbers & valve cores?

- EVA flat liner material - Resists thorns, glass, and sharp objects - Place inside tire between tube and tire

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

The Challenge threaded inline valve extenders add 41.5mm length so that your valves will protrude thru deeper dish rims allowing you to attach a pump. They are compatible with inner tubes and tubular tires that include removable valve core Presta valves. They also include rubber gaskets for an air-tight fit. The kit includes two alloy extenders and a plastic tool.

• External presta valve extensions for deep dish rims • Machined alloy construction • Available in 30mm, 50mm, 65mm, and 70mm lengths

- The original green sealant, completely non-toxic and environmentally safe - Seals punctures up to 1/8-inch

Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Simple and effective design for clean and clog-free sealant injection. - 2 oz injector with highly bendable top hose and rigid bottom hose - Valve core tool included (Presta and Schrader valves) - Compatible with a wide variety of sealants

Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - Large stud offers more bite than regular concave stud and less rolling resistance than XL stud - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

• Integrated presta valve extension • Machined alloy construction • Available in 30mm, 50mm, and 70mm • For use with inner tube with removable Presta valve core

Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.

High-performance tubeless systems deserve high-performance tubeless sealant. The SMART Sealant was designed to work with both vulcanized and handmade TLR and Tubeless tires. This non-allergenic, ammonia-free formula can seal up to 6mm cuts, remains liquid in the tire for up to 6 months, doesn't coagulate with CO2 use, and doesn't damage rims or tires with extended use. Installation is straightforward using the application tip and there is no need to shake the bottle. Available in a 250ml/8.5oz bottle.

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

A new standard in tubeless sealant. Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims. Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. - Non-latex ammonia-free formulation - Kevlar reinforced Fiberlink mesh seal - Seals up to 1/4" punctures - Can be used in extreme temperatures, down to -10 degrees Fahrenheit

Designed to repair punctures up to 3mm, the Panaracer Tubeless Patch Kits work with all UST tires. - Includes: 8cc tube of cement, scissors, 75mm x 50mm rubber patch, and needle/awl - Works on any brand of tubeless tire

- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction

From pro-level race bikes to sport, fitness and adventure bikes, Giant delivers the benefits of tubeless tire technology to riders of all types.