Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Headsets
$94.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Interlok spacer compatible
- 110 year warranty
$14.99
Lightweight aluminum alloy
- Non-Keyed
- Height: 20mm
- 10 to a bag
$40.99
A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings.
- Bearing Type: Cartridge
- Weight: 117g
- Crown Race: 30
- S.H.I.S. Lower: EC34
- S.H.I.S. Upper: EC34
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$44.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC49/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 76g
$29.00
Can Creek's Angleset headsets let riders change the headtube angle of their mountain bike with ease. With adjustments ranging from 0.5 to 1.5-degrees, dialing in the perfect geometry has never been easier.
• Technical Description: EC56/40/H14/K
• Offset angle: 0.5, 1.0, 1.5 degree
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Sealed
• Bottom Stack Height: 14-15mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 7075 aluminum
$19.99
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover
- Mallet: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm
- Color: Black
- Weight: 150g
$33.95
Designed for bicycles with press-fit headsets, the Classic Press Fit Upper Headset features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Press Fit Upper headset adds that classy detail your bike deserves.
- Top cap: 7.3
- Material: Alloy
- Upper Fit (S.H.I.S.): ZS44/28.6
- Upper HT OD/ID: 50/44mm
- Bearing: Sealed cartridge
- Finish: High-polish silver
- Weight: 43g (7.3mm)
$39.95 - $45.95
Bringing Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting, Tom Ritchey designed a unique headset that allows the cables to be run internally from the stem into standard frames without requiring the frame or fork to be modified. The Logic-E headset is designed to allow Shimano Di2 and STEPS cables to be concealed from view and the wind while protecting them from damage.
- Steerer size: 1-1/8" upper
- Drop-in (IS) or Press-Fit (S)
- Weight: 35-44g
$16.95
Compatible crown races for Ritchey headsets.
- This adaptor allows 36° headset bearings, such as those from Chris King, to fit the Ritchey WCS Carbon Adventure fork that feature a 45° crown race
- This adaptor is designed for the Ritchey Carbon Adventure fork, but it will work with all Ritchey carbon fiber forks, though with possible slight cosmetic inconsistencies
- Stainless steel
- Use of this adapter will effectively increase fork length by 4.4mm
$36.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease.
- Material: Alloy
- Bearing: Sealed cartridge, Ti-coated
- Weight: 28-35g
$69.95
The Ritchey EC44 Switch System is an innovative integrated system designed to easily conceal internally routed cables, wires, and hydraulic lines from the handlebar into bicycle frames with straight 44mm headtubes together with tapered 1-1/8" – 1.5" forks. The Switch System consists of three elements: Switch Stem, Switch Headset, and Switch Headset Spacers
$74.95
The Ritchey EC44 Logic E System is an innovative integrated system designed to easily conceal internally routed cables, wires, and hydraulic lines from the handlebar into bicycle frames with straight 44mm headtubes together with tapered 1-1/8" – 1.5" forks.
$29.95
A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.
$88.00
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap
- Weight: 89g
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$37.67
ABI Headset Bearing for new builds or replacements.
- Enduro Headset Bearing ACB 4545 137 Stainless 37 x 46.85 x 7 mm: 45 x 45
$26.99
• Aluminum
• Semi-sealed mechanism
• 1 1/8 inch
• S.H.I.S.: EC34/28.6, EC34/30
$19.19
- Steel cup semi-integrated design
- Threaded semi-integrated design
- Fits many Sun cruisers and others
- Caged bearing 5/32" x 22A
- Cup Diameter: 44mm
- Race Diameter: 30mm
- Stack Height: 18.2mm
$9.99
- Steel cups
- Steel retainer bearings
- Available in chrome or black
- S.H.I.S.: EC32/25.4-24tpi|EC32/27
- Steerer Dia: 25.4mm
- Cup Dia: 32.5mm
$36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 37g
$19.99
- Steel cups
- Steel retainer bearings
- Available in chrome or black
- S.H.I.S.: EC34/28.6-26tpi|EC34/30
- Steerer Dia: 28.6mm
- Cup Dia: 34mm
- Race Dia: 30mm
- Stack Ht: 40mm
Size: 1-1/8"
$14.00 - $24.00
- Forged steel cups with caged 5/32" ball bearings
- TH-857 features a alloy top cover
- TH Series: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 14.9mm/11mm
- Color: Black
- Weight: 126g
$44.99
Box Two™ Integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and split crown race with super-smooth rolling, precision 45x45 bearings.
FEATURES
- Precision Sealed Bearings
IMPORTANT NOTES
This headset was designed to allow 1-inch forks with frames that have 1-1/8-inch integrated head tubes.
COMPATIBILITY
- Box One XS Fork
- Box One XE Fork
- Box One Stem Lock
- Frames with a 1" Integrated NON-Tapered Head-Tube
$27.99
The Revolver headset features a high precision CNC 6061 Aluminum bearing cover with triple rubber seals for a perfect fit.
- Campy spec 45x45 sealed bearings
- 15mm dust cover stack height
- 2.7oz (76.54g)
- Materials: Aluminum Cover, Chromoly Crown Race
$85.90
- Precision CNC-machined 7075 aluminum cups
- Tange sealed cartridge bearings, with O-ring seal
- S.H.I.S.: EC34/28.6, EC34/30
- Stack: 27.7mm
- 110g
$18.00
ABI Headset Bearing for new builds or replacements.
$21.99
The Sunday BMX integrated headset is designed to be a quality headset at an affordable price.
- Laser-etched Sunday logo
- Color-matching spacers included
- Gyro compatible
- High quality sealed bearings and precision tapered wedge help to keep the headset tight
$9.95 - $12.95
- Fork crown race for genuine Ritchey headsets
- Alloy with 45-degree taper
Page 1 of 7
Next page