Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars
$119.99
Inspired by the BMX bars of yesteryear
- 6061 T6 aluminum
- Shot peened and anodized black or silver
- The 22mm OD crossbar is not there just for strength, but allows installing accessories
$99.99
All Box handlebars are engineered and crafted using our Oversized Technology. Handlebars have a dual purpose as they contribute to both steering and pedaling stiffness. By strategically varying wall thicknesses and tube diameters, we have moved material from 3 low-stress areas to zones of high load. This has greatly minimized twists and contributed to responsiveness. Concurrently we have increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar deflection and the consequences can lead to poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model handlebar is tailored for larger-sized racers and also takes our application of Oversized Technology one step further as it employs a tougher chromium molybdenum steel. This allows for a greater variation of wall thicknesses to combat the higher loads coming from that extra rider weight.
FEATURES
- Oversized™ Technology
- Chromoly Steel - Toughest Handlebar Material In • Lineup
- Massive Clamp Interface for Steering Stiffness
- 13 Butted - Variable Wall Thickness to Reduce Weight
$159.99
Ultra-lightweight Box One™ Carbon BMX Handlebars are made using advanced carbon fiber technology. Designed for maximum performance. Made for standard 22.2 bar bore stems.
FEATURES:
- 22.2 Bar Bore
- 3K Weave Carbon Fiber
- Gripper Clamping Area
- Impact-Resistant Clear Coat
- Water Decals
SPECIFICATIONS:
- 3 Inch 4.5 Inch 6 Inch
- Clamp (Ø) 22.2mm
- Material UD Carbon Fiber
- Sweep 6° back, 2° up 6° back, 2° up 7° back, 2° up
- Weight 166 grams / 5.9 ounces 204 grams / 7.2 ounces 288 grams / 10.2 ounces
- Width 21.5 inches 23.6 inches 26 inches
Please note, the maximum recommended rider weight for these bars is 100 pounds.
$19.99
- Traditional BMX handlebar design
- For single-bolt BMX stems
- Chrome-plated
- Clamp Size: 1-inch
- Width: 22.5-inch
- Rise: 6-inch
- Material: Steel
$21.99
- CW style
- Chrome-plated
- Clamp Size: 7/8-inch
- Width: 26-inch
- Rise 8-inch
- Type: BMX
- Material: Steel
$25.99
- Clamp Size: 7/8-inch
- Width: 27.5-inch
- Rise/Reach: 8.25-inch
- Type: BMX
- Material: Steel
$45.99
- Low-rise Black Ops chromoly BMX handle bar
- 30-inch width with a 6-inch rise - Wide and low
- Clamp Size: 22.2mm
- Material: Chromoly
$49.99
- Oversized BMX style cruiser bars perfect for wheelie bikes
- Durable chromoly construction with TIG-welded crossbar
- 22.2mm clamp and grip area
- Width: 31.5-inch
- Rise/Reach: 7-inch
- Upsweep: 1°
- Back Sweep: 10°
- Material: Chromoly
$59.99
- Butted full chromoly construction
- Lightweight design
- Clamp Size: 7/8-inch
- Width: 27.1-inch
- Rise/Reach: 8.25-inch
- Upsweep/Drop: 3°
- Material: Chromoly
$41.99
A light and durable mountain bike handlebar with etched guides for easy set-up.
A new set of bars
Bontrager Comp 31.8 MTB handlebars are a light and durable mountain bike handlebar with etched guides for easy set-up that deliver the look and feel of a performance bar at a value price.
Product details:
- Single-butted, tapered-wall, 6061-T6 alloy construction
- Shot-peened finish increases fatigue life
- Laser-etched brake lever position lines for spot-on control set-up
- 40mm of cut marks on each side for easy width customization
- Bar end compatible
$157.99
Burgtec's first range of signature handlebars developed with, yes you've guessed it! Josh Bryceland.
Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn't one of those guys that's 'crazy' on setup, but he knows what he wants.
- 38MM RISE:
Back in 2018 Josh's idea was for something more versatile that he could use on all his bikes. After testing various prototypes, he finally narrowed it down to a 38mm rise bar, the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy.
So, the 38mm "Ride High" was born. The same unsurpassed comfort and durability as all of the Ride Wide range, but just a little Higher.
- 50MM RISE:
It's fair to say high rise bars have taken a back seat over the last decade much in part to the increasing wheel sizes pushing up front ends of bikes and riders trying to match their previous riding positions.
After first coming to us a little over 3 years ago and deciding on the 38mm rise bar Josh wanted to quite literally raise the bar once again.
We'd previously prototyped the 50mm bar alongside the 38s but at the time just felt they looked out of place. With more riders moving towards 29ers we felt the market just wasn't ready for them.
Josh quickly adapted to the 38s but still felt he was running a lot of stack on his bikes. So with more frequency, he was popping in to Burgtec HQ asking if we had any of the 50mm rise bars left.
In the end, we ran out of prototype bars, and Rats a very persuasive guy so we just decided to go into production with the 50s.
For Josh, he loves how the higher rise allows for more maneuverability as well as getting rid of the excess stack height.
Plus, being a taller rider, they keep his weight where he wants it and freely admits "It's easier on my back".
The bars are a natural fit for Jump bikes but as Josh and the boys show they are equally at home on bigger travel trail bikes too.
- Width: 800mm
- Rise: 38mm, 50mm
- Available in 35mm clamp only.
- Backsweep: 9°
- Upsweep: 5°
- Weight: 38mm Rise = 346g, 50mm Rise = 391g
$370.00
With Versatile Contact Position drops that feature an 8-degree flare, 3-degree outsweep and 40mm tails, the CADEX AR Handlebar sets a new standard for all-road control. A 70mm reach and shallow 115mm drop make it easy to transition from the tops to the hoods and drops. And an innovative one-piece mold construction boosts strength and stiffness while still maintaining a best-in-class weight.
- 8-degree flare and 3-degree out sweep provide total control over variable surfaces.
- Extended 40mm tails on the drops add stability and leverage for increased confidence when sprinting or descending.
- 3-degree backsweep delivers increased comfort and balance on the tops.
- A 70mm reach and shallow 115mm drop allow quick and controlled transitions between the tops, the hoods and the drops.
- One-piece, no-bond mold manufacturing process reduces weight and increases strength and stiffness.
- Precision carbon fiber layup provides added strength at minimal weight.
- Compatible with Shimano Di2 Bar End Type Junction.
$370.00
Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.
$85.00
The workhorse.
Whether your upgrading your stock parts or looking for something a bit more eye catching, the alloy ONE bar delivers.
Where it thrives:
The open road, up and down hills
What it's built for:
Stability, control, efficiency
Highlights:
- Lightweight aluminum construction
- 76mm reach, 125mm drop
- 31.8mm clamp size
$160.00
Rise and shred.
A lightweight carbon MTB riser bar born to rip.
Where it thrives:
In competition, challenging trails
What it's built for:
Precision, control, durability
Highlights:
- Carbon fiber construction
- Lightweight
- 780mm wide, 9 deg backsweep, 4 deg upsweep, 31.8 diameter
$160.00
XC superstar.
Marginal gains aren't just for the road. This XC-focused carbon MTB bar is one of the lightest around.
Where it thrives:
In competition, challenging trails
What it's built for:
Precision, control, durability
Highlights:
- Carbon fiber construction
- Lightweight
- 760mm wide, 0 rise, 9 deg backsweep, 31.8 diameter
$160.00
Descend with confidence.
16% more compliant than our competitors, this enduro and gravity focused handlebar that doesn't forget about weight or compliance.
Where it thrives:
Challenging trails, down hills
What it's built for:
Stability, control, confidence
Highlights:
- Carbon fiber construction for compliance and weight savings
- 800mm width, 35mm clamp size, 210g
- 30mm rise, 8 degree backsweep, 5 degree upsweep
$325.00
Waste not, want KN0T.
Paired with a KN0T or SAVE SystemStem, you'll save at least six watts over a traditional round handlebar. Not only that, you can adjust your bar position—go on, have it all.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, precision, control
Highlights:
- One-piece looks, two-piece function
- Hides cables
- Wind tunnel proven
$325.00
System = speed.
Paired with the SAVE or KN0T SystemStem, you get the speed and good looks of a one-piece system with the adjustability of a two-piece.
Where it thrives:
The open road, up and down hills
What it's built for:
Precision, control, comfort
Highlights:
- One-piece looks, two-piece function
- Flatter top section, flared drops, and 6mm of deflection for a smooth ride
- Integrated computer mount
$81.00
- The original Chromag bar
- Used from XC to DH, the OSX is Chromag's most versatile option
- 31.8mm clamp
Specs:
- Rise: 25mm
- Handlebar Width: 800mm
- Stem Clamp Diameter: 31.8mm
- Handlebar Material: Aluminum
- Upsweep: 5 degrees
- Backsweep: 8 degrees
$81.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$84.60 - $98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$147.60
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
$168.30 - $200.00
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum
$46.99
- Designed for riders who are looking for a more comfortable position or ride more aggressively in the drops
- 6061 T6 aluminum with shallow drop PPA and ergonomic top
- Matte black anodized
- 330g @ 42cm: all measurements are center-to-center
$54.99
- 10-degree flare and a wide flat top for comfort and control
- 6061 T6 butted aluminum
- 310g (42cm)
$59.99
30-degree accentuated drop flare that allows for excellent control while riding off-road
- Provides additional space for bar bags
- 6061 T6 butted aluminum, 310g
$79.99
- Double butted 6061-T6 aluminum handlebar for track use\n
- Anodized and shot peened finish
- 330g @ 42cm: all measurements are center-to-center
$89.99
Classic Cinelli Road bars with a milky silver anodized finish
- 6061 T6 aluminum alloy construction with center sizing sleeve
- 290 grams @ 40cm: all measurements are center-to-center
$89.99
Classic Cinelli Criterium bars with a milky silver anodized finish
- 6061 T6 aluminum alloy construction with center sizing sleeve
- 280 grams @ 40cm: all measurements are center-to-center
$119.99
- 6061 T6 butted aluminum with a flattened ergonomic shape on the bar tops
- 320g (42 cm)
$289.00
Ultra high performance and super light professional-level bar
Monocoque HM carbon fiber handlebar is exceptionally light and reactive due to the PPA concept (Progressive Parabolic Action) drop shape that allows a perfect hand grip
- Use AVS-Gel (under tape / top of the drops) strips for added comfort
- 185g @ 42cm: measured center-to-center
$78.99 - $84.99
Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight
- 7075 heat treated spiral butted aluminum
- Updated graphics and an additional 50mm rise option
$37.99
- Double-butted 6061-T6 aluminum construction
- RHM Shallow-ergonomic profile with more hand positions than traditional anatomic shapes
- Black anodized
- Drop/reach are measured center-to-center, width is measured outside-to-outside
- 280g (42cm)
$37.99
- Double-butted 6061-T6 aluminum construction
- Classic bend with shallow drops for in-the-drops comfort and control
- Drop/reach are measured center-to-center, width is measured outside-to-outside
- 320g (42cm)
$121.99
Triple-butted 7075-T6 aluminum construction with provisions for STI/Ergopower cable routing\n- Rapid Hand Movement (RHM) bend with a patented Continuous Incremental Radius design provides a modern, shallow-ergonomic profile with more hand positions than traditional anatomic shapes
- Drop/reach are measured center-to-center, width is measured outside-to-outside (O-O)
- The drops flare outward at 12 deg angle and extend the width (O-O) an additional 60mm. 260g (42cm)
$129.99
- 6061-T6 aluminum construction
- A great choice for any Gravel or Adventure bike setup
- 10-degree backsweep angle and 5-degree downsweep
- 10mm rise is an additional help to get the desired handlebar stack height
- 24-degree flare and 3-degree outsweep at the drops offers superior stability
$84.99
The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style.
- 7075 T73 Gradient butted aluminum
- Full bead blast finish for increased durability and fatigue resistance
$89.99 - $94.99
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships!
- 800mm width
- Designed for DH / Enduro / All MTN applications
- Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018
- Incredibly detailed two-tone bead blast and polished ano finish
- 9-degree bend / backsweep by 5-degree upsweep
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Designed for maximum ride quality with a 31.8mm bore
- World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven
- The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams
- Features measured cut marks and center alignment detail
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 15mm rise: 333g
- 25mm rise: 342g
- 38mm rise: 343g
$89.99 - $94.99
DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars.
- Intended use: Enduro and DH
$89.99 - $94.99
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain!
Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat!
- The DEITY All MTN / Enduro / Trail handlebar
- 787mm wide
- The SKYLINE handlebar is our lightest aluminum bar
- Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability
- Custom Gradient Butted 7075 T73 aluminum
- Featuring a 31.8mm bore for lightweight performance and strength
- Features measured cut marks and center alignment detail
- 9 degree bend / backsweep by 5 degree upsweep
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
Sizes:
- 15mm (290gm)
- 25mm (296gm)
$91.99
Brendan Fairclough's signature handlebar is an homage to the effortless style, grace, and speed exemplified by Brendan's every move. The BF800 Brendog signature handlebar, which has been developed and tested on the World Cup DH circuit for almost three years to perfect the feel he demands for World Cup-caliber speed.
Creating the perfect combination of rise, width, bends, sweep, flex, and responsive damping is not an easy task, but DEITY has perfected the ability to deliver the best-feeling handlebars with unparalleled strength time-and-time again.
Utilizing Brendan's preferred 8-degree backsweep with our favorite 5-degree upsweep gives this bar a more aggressive positioning to attack the gnarliest DH trails in the world. At an 800mm width and featuring a 30mm rise, our proprietary Gradient Butting Technology coupled with our Mono Heat Treatment Procedure delivers a handlebar that is more than 20% stronger than any other handlebar from our competition at this weight category.
We guarantee you will look as good as Brendan riding his signature BF800 Brendog Handlebar while you're pushing your limits to match his speed and style! So get your hands on DEITY's latest and greatest rider collaboration, designed to elevate your ride to podium status!
- The Brendan Fairclough Signature Handlebar
- Designed for DH / Enduro / All MTN applications
- Developed and tested rigorously for nearly 3 years on the World Cup DH circuit
- Incredibly detailed two-tone bead blast and polished ano finish
- Brendog signature 8-degree bend / backsweep by 5-degree upsweep
- 800mm width
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Mono Heat Treatment Procedure for increased strength
- Stiffness for tracking yet compliant for endless chatter and big hits
- Wider center bore spacing for unrivaled stability
- Designed for maximum ride quality with a 31.8mm bore
- Alignment control markers for perfect set up and spacing of your levers
- Features measured cut marks and center alignment detail
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 30mm rise (343 grams)
$94.99
- Cam Zink designed bars with unique upsweep and backsweep
- 9.5 deg bend x 4.5 deg upsweep
- Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail
- Made from custom gradient butted 7075 T6 aluminum
- 800mm wide, 31.8mm clamp
- Third party online sales strictly prohibited by manufacturer
$179.99 - $189.99
After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar.
Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides.
- Oversized 35mm Bore Carbon Handlebar
- Designed for Enduro / All Mountain / Trail
- Developed and designed exclusively with our own in house DEITY molds
- Unidirectional Carbon Construction
- Damping properties reduce hand fatigue
- 800mm Width
- 9 degree bend x 5 degree upsweep
- The ultimate combination of strength, weight, and ride quality
- Textured non slip stem clamping surface
- Textured grip ends for added bite
- Covered by our Lifetime Crash Replacement Policy to the original owner
- Recommended MAX Torque Spec range (4 - 4.5 Nm)
- 15mm rise: 222 grams
- 25mm rise: 226 grams
$179.99 - $189.99
Deity Speedway Handlebars: at 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. Designed for the sweet spot that absorbs maximum vibration, chatter and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed.
$19.99
A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position.
- AL-6061 aluminum alloy
- ISO4210 safety tested for city/trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 50-degree sweep
$19.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep
$19.99
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style.
- Material: Aluminum
- Lever Compatability: Mountain 22.2mm
$21.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- Zero-Rise
$25.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise
$29.99
Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike.
- Designed for City-Trekking use
- Not intended for mountain biking
- Bar Clamp Diameter (mm): 25.4
- Color: Black
- Lever Compatibility: Mountain 22.2
- Weight: 479g
- Width: 585mm
$34.99
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
$39.99
Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing.
- Made from 6061 Aluminum
- Single-groove cable routing
- Accessory Mount Diameter (mm): 26.0
- Bar Clamp Diameter (mm): 26.0
- Bar Drop (mm): 128
- Bar Reach (mm): 80
- Bar Top Style: Round
- Clip-on Compatible: No
- Drop Bend Style: Compact
- Material: Aluminum
- Weight: 340g (40cm)
- Width Measurement: Center
$47.99 - $49.99
These are 31.8mm flat top road drop bars with very shallow reach.
- Double-butted and tapered 6061-T6 aluminum bars
- 120mm wide center section with 31.8mm diameter
- Flat top bar with cable grooves
- Accessory Mount Diameter (mm): 31.8
- Bar Clamp Diameter (mm): 31.8
- Bar Drop (mm): 125
- Bar Reach (mm): 70
- Bar Top Style: Flat
- Clip-on Compatible: Yes
- Color: Black
- Defined Color: Black
- Drop Bend Style: Compact
- Material: Aluminum
- Weight: 266g
- Width: 38cm
- Width Measurement: Center
$190.00
The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders.
- Includes decal sheet to color match with ENVE wheel decals
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
Page 1 of 7
Next page