Filter By:
Brakes/Levers/Pads
$173.50 - $259.00
A short-pull brake lever for use with short pull brakes: cantilever, caliper, U-brakes, or Roller Cam.
- 6061 Aluminum
- Perfect with Neo-Retro, Touring Canti, and Racer brakes
- Super comfortable grip, and an excellent feel
- Reach adjustment screw
- An unstrippable clamp screw and the Paul’s Hollow Lite pivot pin
- 137g
(if you are looking for a lever to use with the Motolite or Klamper disc brakes, pls see the Love Lever by Paul)
$155.50
The Cross Lever is an inline brake lever designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars.
- 6061 Aluminum
- Fully CNC’d construction gives them a solid feel in the hand
- Hinged clamp allows for installation without needing to strip your bar tape
- Adjustable pivot pin position (for short-pull or long-pull brakes)
- Barrel adjuster makes it easy to fine tune your cable tension
- Anodized Silver or Black
- 140g
$74.00
Stubby lever for fixed gear bikes
- 23.8mm clamp
- Fits on the narrower grip section of road handlebars
- 56g
Please note: Because of its compact design the E-Lever has less leverage than Paul's other brake levers. For this reason we cannot recommend it for use as the sole method of braking. The E-Lever should only be used in conjunction with other brake mechanisms such as a fixed gear hub or coaster brake. For a similar brake lever with greater leverage, take a look at the Cross Lever.
$244.50
We think this is the best mechanical disc brake on the market, machined by us here in Chico, California.
Flat-Mount Klampers are available in Short-Pull (SRAM/Shimano) or Campagnolo Pull.
TECHNICAL INFORMATION
Compatibility: All Flat-Mount Bicycles
Material: 6061 Aluminum, Heat Treated 12L14 Steel
Weight: 211g
Brake Pads: Kool Stop Disc Brake Pads
$244.50
A mechanical, cable operated disc brake caliper from Paul Components!
Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations.
- Meaty stiff calipers give a good response and great feel
- Extra-large three ball system running on hardened steel actuators for more smoothness and less wear
- Needle bearing thrust washer reduces friction
- Sold as caliper only (rotor & adapter must be purchased separately)
TECHNICAL INFORMATION:
Compatibility: IS/Post Mount
Cable pull: Long-Pull for SRAM/Shimano Mtn
Material: 6061 Aluminum, Heat Treated 12L14 Steel
Weight: 211g
Brake Pads: Kool Stop Sintered
$244.50
A mechanical, cable operated disc brake caliper from Paul Components!
Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations.
- Meaty stiff calipers give a good response and great feel
- Extra-large three ball system running on hardened steel actuators for more smoothness and less wear
- Needle bearing thrust washer reduces friction
- Sold as caliper only (rotor & adapter must be purchased separately)
TECHNICAL INFORMATION:
Compatibility: IS/Post Mount
Cable pull: Short-Pull for SRAM/Shimano Road
Material: 6061 Aluminum, Heat Treated 12L14 Steel
Weight: 211g
Brake Pads: Kool Stop Sintered
$176.50
The Love Lever Compact is a lightweight long-pull brake lever designed for two-finger operation and easy adjustment.
- 6061 Aluminum
- Simple, light, durable, comfortable, handsome!
- Perfect with Motolite or Klamper brakes
(but work well with any v-brake, mech. disc brake, or other long pull brakes)
- New geometry with more power and better ergonomics
- Lever blade is about 20mm shorter than the 2.5 model
- Enlarged perch clamp screw and the Paul’s Hollow Lite pivot pin
- 125g
(if you are looking for a lever to use with Neo-Retro, Touring Canti, or Racer brakes - pls see the Canti Lever by Paul)
$180.00
- Mini-v brake for use with standard short pull (road) brake levers
- Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile
- Short curved arms give plenty of clearance for cyclocross tires or wide fenders
- Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength
- Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel
- Made in USA
$188.50
- Reversible 6061 aluminum arms for left or right cable routing
- Quick-release noodle is lined with Teflon for smooth action
- High tension square wire springs
- Thinline threaded pads with easy-to-adjust arm hardware
- Made in USA
$113.00 - $169.50
The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability.
- Compatible with drop bar levers and short pull mountain bike levers
- Modeled after the popular Mafac Tandem cantilever
- Sealed pivot system with adjustable spring tension and Kool Stop pads
- Recommended for standard pull (not linear pull) brake levers
- Made in USA
$184.00
- Awesome power
- Design accomodates fenders & wider tires
- Adjustabe for 27” and 700c wheels
- Center or caliper boss mount (braze-on)
$133.00 - $174.00
- Works well as a rear brake where the Neo-Retro may cause heel clearance problems
- Compatible with drop bar levers and short pull mountain bike levers
- Sealed pivot system with adjustable spring tension and Kool Stop pads
- Recommended for standard pull (not linear pull) brake levers
- Made in USA
Page 1 of 1