Filter By:
- Bar Ends (22)
- BMX (59)
- Bottom Brackets (253)
- Brakes/Levers/Pads (720)
- Cables (256)
- Cassettes/Freewheels (158)
- Chainrings (323)
- Chains (155)
- Show More Categories
- Cranksets (339)
- Derailleurs (178)
- Forks (179)
- Groups (17)
- Handlebar Grips/Tape (402)
- Handlebars (410)
- Headsets (199)
- Pedals (370)
- Saddles (399)
- Seatposts (139)
- Shift/Brake Combinations (76)
- Shifters (134)
- Shocks (36)
- Stems (199)
- Other (2076)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$11.50
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$99.00
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 18mm high
- Spindle diameter: 9/16-inch
- Weight: 352 grams"
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 9mm high
- Spindle diameter: 9/16-inch
- Weight: 308 grams
$14.00 - $14.66
Super hardened steel designed for high torque Singlespeed and BMX use.
$54.02
- Forged and CNC-machined aluminum with precision sealed bearings for 2-pc cranks and 24mm spindles - BSA 1.37"x24T for 68/73mm shells
$8.99
- Aheadset preload adjusting bolt, cap and star nut
- Bolt is hollow for cable pass-through
$119.99
Inspired by the BMX bars of yesteryear
- 6061 T6 aluminum
- Shot peened and anodized black or silver
- The 22mm OD crossbar is not there just for strength, but allows installing accessories
$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame.
- Alloy construction
- Replacement derailleur hanger sold separately (Part Number DP0814)
- Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames
$20.00
• M4 threaded pedal cages mounting holes
• Four windows in pedal body large enough to fit double toe straps
• Polished Body
• Concave footbed
• Single-sided design
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included.
- Aluminum hatch cover with stainless screws
- All necessary screws and plates included
$1.00
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$3.36
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- AX-2654 and AX-2657 are double ended, with both Road and MTB anchors
- 1700mm length
$3.50
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$5.12
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- 2000mm length
$5.54
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- 1700mm length
$5.76
- Basic housing and galvanized inner cable with header card
- Brake kit includes black casing and a 1.6mm cable
- Derailleur kit includes black casing and a 1.2mm cable
- Cables have dual ends with leads to fit any brake or shifter
$6.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction
- 2000mm
$7.02
- 72mm long molded brake blocks with smooth post for common cantilever brakes
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable
- X-long 3000mm cables for non-traditional uses
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable
- X-long 3000mm cables for non-traditional uses
$7.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction
- 1700mm
$7.99
- Premium 31-strand stainless-slick low-friction rust-resistant cable
- X-long 3000mm cables for non-traditional uses
- Save 50% or more when you buy in the 100pc shop dispenser filebox
$11.90 - $16.34
- Slotted aluminum barrel adjuster with backing nut for common brake levers
$13.26
- 55mm long forged aluminum holder with hardware to fit Shimano-type caliper brakes
- Replacement inserts fit most 55mm aluminum holders
$27.99 - $29.95
- Lightweight stainless steel rotor, Great for all-Mountain or enduro use
- International standard 6-Bolt 44mm bcd rotor mounting. 95/112/154G
Page 1 of 231
Next page