Parts

The Gyro G3 upper top plate is designed for use with the G3 detangler.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Crown Race MX - Size: MX TH 26.4mm

- Machined aluminum spacers for tuning stem height - Black spacers with white FSA graphic - 5mm and 10mm Spacers are sold individually - 1-1/8" Spacer Kit includes: (3) 3mm, (4) 5mm, (3) 10mm, (2) 20mm

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

- Rubber - Color: Black

FSA Mega Exo Small Parts.

FSA Standard Headset Bearings

FSA Mega Exo Small Parts.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

RockShox cable and hose guide.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

BB30 Spacer - 15.46mm

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

Shimano Front Derailleur Cable Fixing Assembly

- Replacement link wire for cantilever brakes

- For MTB levers - 7mm x 1mm - Aluminum construction

- Fits cantilever brakes - Sold individually

- Standard steel replacement

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.

Bulk packaged, corrosion resistant stainless steel fasteners.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike

- Replacement Rotor Bolt kits for Formula rotors - 6/pack

Hope Brake Lever Parts

Complete remotes and remote components for KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

- MTB or Road - 1.5 x 1855mm - Galvanized

• Compatible with most side pull and center pull brakes • All weather compound

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

- Stainless steel top tube cable clamp. 4g each

- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement

The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline

- 1.5mm x 1700mm advanced die-drawn stainless steel cable is low friction with minimal elongation for smooth and responsive braking performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Compatible with all cable-actuated road bike brake systems - Compatible with all high-performance outer casing, lubricants, and end caps

- 1.1mm x 2100mm advanced die-drawn stainless steel cable is low friction with minimal elongation for consistently effortless shifting performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Recommended for 10-speed drivetrains - Compatible with all high-performance outer casing, lubricants, and end caps

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

Brass compression olive for Hope hydraulic disc brakes.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Sold in pairs - Allen wrench included