Filter By:
- Parts & Accessories (56)
- Bottles/Cages (259)
- Packs/Systems (20)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Hydration
$14.95
High-performance cage at a low price point! Large area bottom hook supports large bottles with Side cutouts to enable fast bottle withdraw and entry.
High-performance cage at a low price point!
- Large area bottom hook supports large bottles
- Extra sturdy high resistance techno polymer design
- Made in Italy with the finest Italian quality
- Pair with the hyper-reflective Cool Shot insulated bottle (sold separately)
Grip Force
- Approx 4lbs grip force
Ideal Uses
- Road
- Triathlon (Aerobar and Frame)
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment
- Designed to be easily flipped to provide either left or right hand bottle access
- Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset
- Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
$29.95
Be rad with the B-RAD System, the ultimate Bottle Relocation and Accessory Device. Mount your bottles away from inconvenient rear shocks, add storage room for tools or tubes below a bottle cage, and provide space for a second bottle on sufficiently long downtubes—all with one patented design. Our handy 1-1 template helps you determine which Base measurements match your frame and our selection of B-RAD Replacement Parts ensures you’ll never go without a particular feature or strap. Stay hydrated and prepared on every ride by carrying your essentials right where you need them!
Half Bottle Adapter lets you offset the bottle cage location to make your bottle more accessible, and to fit additional accessories like a pump, tool, tube, etc.
- Easy to access bottles and out of the way of legs
- Easy to install using existing cage mounts on a bike (B-RAD Base component required; sold separately)
- Use the DogBone base for curved downtube frames
Great for trail, enduro, bike packing, XC, and town/commuting applications. The B-RAD Mini Strap and Accessory Mount were designed especially for the Half Bottle Adapter so it could be mounted to the side of the bottle. But you can customize it to fit your needs. Works great with modern trail bikes from companies like Pivot, Intense, and Santa Cruz or others with difficult bottle access.
Tech Specs:
- Material: 6061-T6 aluminum brackets
- Weight: 18g
- Maximum load: 1700g
- Tools Needed: T25 Torx
- Torque: 3-4 Nm
- Made in the USA
$69.95
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages.
- Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement.
- Can be bent back into shape if damaged, and is available in both titanium and stainless steel
$24.95
The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement.
- Hand-bent hollow tubing
- Fits any bike frame that has two standard bottle cage mounts with 64mm spacing
- Easily bent back in to shape if damaged
- Made by hand in Minnesota
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.
$60.00
- Whisky Carbon Water Bottle Cage
- Cage Material: Carbon
- Mount Type: Bolt-On
- Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
$50.00
The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.
$88.90
- CFD refined integrated bottle with Bento box and computer mount
- Articulated straw mount to allow precise angulation and unobtrusive fold-away
- Forward computer mount with easy line-of-sight
- Included Vision Drop Bottle System and Extension Mount
- Metron TFE compatible with adaptor
SIZES
- 700ml
FINISH
- Matte black
- Color graphics
WEIGHT
- 335 grams
$24.70
With this new Trimax grip cage, you won’t need to worry about losing your bottle out on the road. You can take on any terrain and still find your bottle intact. It is also compatible with the Trimax Rear Hydration System.
- Water bottle cage with greater stiffness to prevent unintentional bottle release
- Reinforced ribs and sturdy bottom shelf for positive engagement and release
- Universal bottle fitment
- Fiber-reinforced Nylon body
- 20mm of adjustability for the ideal mounting position
$89.90
Made to fit any type of saddle, the Vision Trimax rear hydration system can suit any need. With the option to mount two extra high grip cages, no rider will go thirsty whether it’s in a race or riding with friends.
- Modular saddle drink system universally fits both traditional and snub-nose saddles
- Multiple mounting and lashing points can be customized for water bottles, CO2 pumps, accessory bags, and tie-strap combinations
- 3-position (40 degrees) saddle rail mounting options
- Bottle cages are mounted for optimized accessibility and ideal aerodynamics
- 5-position (40 degrees) bottle cage tilt adjustability
- Precision-made alloy frame with corrosion-resistant hardware
- Includes Quiver Saddle Mount and two High Grip Cages
$9.99
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount
(Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
$25.00
The Moderniste Bottle Cage continues to be a favorite for retro and contemporary bikes. The elegant, minimalist design securely holds a plastic or stainless steel water bottle. This beautifully polished cage is made from lightweight, tubular stainless steel, so it is strong and exceptionally lightweight (43g).
The cage can also be squeezed inward or expanded to get the perfect fit for your preferred water bottle.
$39.00
Carrying enough water on longer rides can be a problem. This is especially true for touring cyclists in the southwest as well as parts of the world where potable water sources are far apart. We designed the Mojave cage to fit 32oz Nalgene bottles, 32 oz insulated Klean Kanteen bottles, and 40oz Klean Kanteen stainless steel bottles.
The mounting tab has 5 holes to allow you to mount it in three positions, higher or lower as best fits your frame. You can also mount it on newer frames with three water bottle screw bosses. Construction is all stainless steel.
One caveat, the Klean Kanteen bottle is pretty tall, about 29cm with the sport top. It may not fit inside the main triangle of smaller frames. The Nalgene is shorter, but doesn't offer a sport top.
Weight is 158 gr. Available in Polished Silver and Smooth Noir.
$25.00
These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time.
The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle.
Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made.
There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.
$34.95
The Quick Cage 3-bolt Adapter is made from high-impact nylon with stainless steel inserts and is designed to hold any 2 or 3-bolt cage, such as the Anything Cages by King Cage, Salsa, and Blackburn. Stuff sacks, sleeping rolls, tents, as well as extra-large water bottles are all game.
$16.75
Turns your own bottle cage into a quick Cage so you can mount your bottle anywhere.
$28.50
Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage.
- Stainless steel cage with a black vinyl coating
- Fits any size frame tube or seatpost with a Velcro strap
- Will not scratch metal bottles or remove paint
- TF-41 is capable of holding bottles up to 24oz
- TF-42 is capable of holding standard Nalgene bottles
- Made in the USA
$36.50
Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage.
- Stainless steel cage with a black vinyl coating
- Fits any size frame tube or seatpost with a Velcro strap
- Will not scratch metal bottles or remove paint
- TF-41 is capable of holding bottles up to 24oz
- TF-42 is capable of holding standard Nalgene bottles
- Made in the USA
$36.50
- Stainless steel cage with 24 ounce screw top bottle
- Cage Velcros on any size frame tube or seat post
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$7.95
Topeak's Modula EX is a sleek, adjustable bottle cage that securely carries a wide range of bottles.
$14.95
Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.
$18.95
Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.
$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump.
- Material: Engineering grade plastic
- Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge
- Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I
- Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3”
- Weight: 30 grams / 1.06 oz
*Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included
$59.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs.
- Material: Pressed aluminum
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Hydration Capacity: One or two bottles (up to 750cc each)
- Max Load: 2.5 kg / 5.5 lb
- Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage
- Added Feature: 2 angle positions
- Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7”
- Weight: 97 grams
$11.99
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options.
- Fits tubes 20 - 60mm
- Engineering grade polymer
- Max load: 1.5 kg / 3.31 lb
- 26 g / 0.92 oz (2 pcs)
$27.90
- Copper finish matches premium leather saddles and MKS pedals
- 4.5Mm aluminum rod with aluminum bolts
- Made in japan